Adient, a supplier of automotive seating, has launched Sculpted Soft Trim, a manufacturing technology designed to provide new design options for vehicle interiors. The product is a breathable, formed trim solution that can be applied to large panels or components such as armrests, headrests and child seat anchor covers.

The technology uses an automated forming process to create shapes, reducing the requirement for traditional manual sewing. This method allows for the creation of concave surfaces and 3D shapes that were previously difficult to execute using standard cut-and-sew techniques.

Sculpted Soft Trim is designed to improve craftsmanship while lowering labour requirements. In applications such as rear seat child anchor locations, the system can replace up to twelve individual patterns and sew lines with a single formed component.

Key features of the technology include:

• Material Compatibility: Support for a range of fabrics and vinyl materials.
• Surface Detail: Capability to achieve 3-dimensional concavity without losing grain detail.
• Customisation: Ability to add embossed or debossed textures, graphics and badging within the same tooling process.
• Material Integration: Facility to pre-sew and form dissimilar materials together.
• Firmness Control: Variable firmness options to meet specific application requirements.

Adient has confirmed that Sculpted Soft Trim is available globally. The technology is scheduled to enter production on vehicles from several original equipment manufacturers (OEMs) during 2026. According to the company, the process reduces cycle times by approximately 50 percent compared to traditional forming methods.

Mike Maddelein, Vice-President of engineering in the Americas, Adient, said, “Sculpted Soft Trim fundamentally changes what’s possible in seat trim design by combining premium aesthetics with meaningful manufacturing efficiency. With cycle times reduced to roughly 50 percent of traditional forming methods, this technology delivers both speed and quality. In addition, decorative sewing, quilting and embossed or debossed features introduce another level of specialisation, all executed with tight tolerance control to ensure consistent, high-end craftsmanship at scale.”

Comments (0)

ADD COMMENT

Link Copied!

The Automotive Component Manufacturers Association of India (ACMA), the apex body representing component manufacturers in the country, has appointed Sriram Viji, Managing Director, Brakes India, as President for the 2026–27 term.

The industry body also named Anjali Singh, Executive Chairperson of ANAND Group and Gabriel India, as President-Designate. 

Vinnie Mehta, Director General, ACMA, said, “We are delighted to welcome Mr. Sriram Viji and Mrs. Anjali Singh to their new roles. Their rich industry experience and strategic vision will guide ACMA as the sector navigates geopolitical uncertainty and the evolving mobility landscape. I am confident that their leadership will strengthen our engagement with Government and industry partners to diversify supply chains, improve access to critical raw materials and enhance India’s global competitiveness.” 

Sriram Viji, President, ACMA, said, “It is an honour to lead ACMA as India strengthens its position as a trusted partner in global automotive value chains. Our priority is to deepen local capabilities and accelerate investment in advanced technologies, R&D and innovation, while embedding sustainability across the industry. As electric, connected and new-energy mobility create fresh opportunities, we must move beyond adapting to change to shaping it. Together with our members, we will work to position India as a global hub for high-value manufacturing and next-generation mobility solutions.”

Comments (0)

ADD COMMENT

Link Copied!

German automotive supplier MAHLE has established an e-compressor production facility in Coimbatore, which it claims makes it the first company to manufacture the component in India.

The German firm has invested EUR 7 million in the site to produce e-compressors, which regulate thermal management, battery life, charging speeds and driving range in electric vehicles.

The production line has a capacity of over 300,000 e-compressors annually to supply domestic and international vehicle manufacturers. The launch creates 50 jobs, aligning with the Indian government's ‘Make in India 2.0’ manufacturing initiative.

The Coimbatore facility already produces starter motors, alternators, controllers and traction motors for two-wheelers and three-wheelers. Following the setup of an R&D facility in 2023 for product validation, MAHLE has outlined plans for women to represent 75 percent of the plant's total workforce by 2027.

The company entered India in 1958 through a piston manufacturing joint venture and now has expanded its operation across 15 locations in the country with 5,900 employees.

Ivan Lenehan, Vice-President, MAHLE Powertrain and Charging, India, China & East Asia, said, “India continues to play an increasingly important role in the global mobility transformation. This facility strengthens our presence in one of the world’s most dynamic automotive markets and reinforces our commitment to sustainable mobility solutions.”

Milind Mhaiskar, MD, MAHLE Electric Drives India, said, “This production facility underscores our focus on localisation and customer-centric innovation. The success of this project reflects the dedication of our teams and our collaborative approach with business partners.”

Comments (0)

ADD COMMENT

Link Copied!

Delhi NCR-based fluid transmission provider Imperial Auto has appointed Sandeep Bathla as its new Chief Global Operations Officer.

In his new role, Bathla will oversee manufacturing operations and direct programs to update automation, expand production capabilities and streamline supply-chain networks across company facilities. He will report to Vikram Wagh, Managing Director and Chief Executive Officer, Imperial Auto.

Bathla brings over three decades of industry experience to the role and previously served as Executive Director and Chief Operating Officer at Plasser India, following management roles at Blue Star, Motherson Sintermetal Technology and Eicher Tractors. He holds a Bachelor of Engineering in Mechanical Engineering from NIT Kurukshetra and a PhD from European International University, Paris.

Vikram Wagh said, “As Imperial Auto continues to scale its operations and strengthen its position in global markets, building a future-ready and high-performing manufacturing organisation will be critical. Sandeep brings extensive experience across manufacturing and the automotive industry, along with a strong understanding of operational excellence. His leadership will be instrumental in enhancing our manufacturing capabilities, improving responsiveness and creating greater value for our customers.”

The executive change aligns with Imperial Auto's plans to expand its international manufacturing footprint and engineering capabilities.

Comments (0)

ADD COMMENT

Link Copied!

Tier 1 automotive supplier Lumax Auto Technologies, part of the DK Jain Group, has further strengthened its management team by onboarding Ambarish Kumar Gupta as the new Vice-President – Operations.

Gupta comes with over two decades of experience in the automotive industry, with senior roles across financial operations.

The industry executive has worked with the likes of Forvia Faurecia, Marelli, Brose, Magna Steyr, Infosys, L&T Technology Services, BlueBinaries Engineering & Solutions and PGUB Management Consulting, among others.

In his new role, he will be responsible for advancing futuristic automotive electronics, strengthening operations and making the company future-ready.

Gupta will also support Lumax Auto Technologies’ innovation, technology and operational excellence roadmap.

Comments (0)

ADD COMMENT

Link Copied!