Musashi India, a subsidiary of Japan’s Musashi Seimitsu Industries and a manufacturer of two-wheeler and four-wheeler transmission components, has completed the Phase 2 expansion of its Bengaluru manufacturing facility. The enlarged plant will become fully operational by December 2025.

The strategic upgrade reinforces Musashi’s commitment to India’s automotive and electric mobility sectors. The facility is set to become the Musashi Group's largest integrated manufacturing site under one roof.

The expansion, which adds 11,000 square metres of developed area, boosts the total plant size to 32,000 square metres and introduces new capabilities in forging, machining and heat treatment.

The company has increased production capacity from 4 million to 6.5 million sets of scooter and motorcycle transmissions annually. This move is expected to nearly double output value from INR 5.5 billion to INR 10 billion annually.

The Bengaluru plant will now serve as a hub for both domestic and export markets, catering to multiple categories, including 100–750cc motorcycles, 100–125cc scooters and two-wheeler and three-wheeler e-axles for the internal combustion engine (ICE) and electric vehicle (EV) segments.

The facility incorporates automated technologies such as gear grinding, automated gear checking and camera-based inspection systems, supported by robotic and gantry solutions, ensuring high precision and efficiency. The plant will also function as a prototype and testing hub for ICE transmissions and e-axles.

In line with global environmental, social, and governance (ESG) commitments, the facility features:

• Rooftop Solar: A 2.16 million kWh installation.
• Green Energy: The plant operates with over 96 percent green energy, powered by a mix of hydro, wind, rooftop and captive renewable sources.

These initiatives support Musashi’s global objective of achieving carbon neutrality across its value chain by 2038.

Naoya Nishimura, CEO, Musashi Auto Parts India and Africa Region, said, “The Bengaluru facility expansion marks a significant leap forward in Musashi’s journey of growth and innovation in India. Constructed within just 18 months, it stands as the largest integrated manufacturing facility under one roof within the Musashi Group. This facility embodies our ‘Go Far Beyond’ aim, combining precision engineering, advanced automation and sustainability to create a new benchmark in manufacturing excellence. This development will further strengthen Musashi India’s position as a trusted partner in the global EV supply chain while reinforcing its leadership in next-generation mobility solutions.”

Comments (0)

ADD COMMENT

Link Copied!

Pune-headquartered automotive component supplier Varroc Engineering and French battery system manufacturer Forsee Power have joined forces to produce electric vehicle battery packs in India.

Under the terms of the transaction, Varroc will acquire a 45 percent equity stake in Forsee Power's Indian subsidiary, Forsee Power India and will assume management and operational control of the entity.

Varroc will also subscribe to Optionally Convertible Redeemable Preference Shares to provide growth capital for the joint venture, subject to regulatory and corporate approvals. The joint venture will initially focus on battery pack development for three-wheeled electric vehicles, before expanding into two-wheelers, light commercial vehicles, buses, trucks and industrial equipment.

The agreement combines Forsee Power's battery system architecture and software with Varroc's component manufacturing, engineering infrastructure and vehicle manufacturer supply relationships across domestic assembly operations.

Arjun Jain, Whole Time Director and CEO – Business I, Varroc, said, "Electric mobility is both evolving and growing rapidly, thus creating new opportunities and new requirements for the automotive industry. Through this evolution we believe OEMs will need partners who can anticipate changes and translate them into reliable, cost-effective solutions at scale. Our partnership with Forsee Power brings together complementary strengths in battery-system technology, automotive engineering, manufacturing and customer relationships. It represents an important step in expanding Varroc’s portfolio to address the evolving needs of our market and the future of mobility. This will further enhance addressable content per electric vehicle in all the segment."

Christophe Gurtner, Chairman and CEO, Forsee Power, said, "With the rapid growth of electric mobility adoption in India, the opportunity is clear and we are ready to scale. Joining forces with Varroc combines our battery technology with local industrial strength and customer access. Three-wheelers are our starting point, with a clear ambition to expand across two-wheeler, commercial and industrial vehicles."

Comments (0)

ADD COMMENT

Link Copied!

German technology company AUMOVIO will showcase a portfolio of braking, rider assistance and connectivity solutions for motorcycles and powersports vehicles at EICMA 2026 in Milan, scheduled from 3 to 8 November 2026.

The company's showcase centres on the launch of the MK 120 MAB brake system, which extends AUMOVIO's braking product line beyond two-wheeled applications. The system is engineered for three-wheeled scooters, side-by-side vehicles, utility terrain vehicles and all-terrain vehicles.

It integrates vehicle stability functions derived from passenger car and motorcycle architectures, including active yaw control and wheel lift mitigation, to assist vehicle control across varied terrain.

In addition to the MK 120 MAB, AUMOVIO will display its Motorcycle ABS 2.3 Base unit featuring an optional inertial measurement unit, alongside the MiniMAB EVO system designed for small-displacement scooters and commuters.

The company's display also features radar sensors for adaptive cruise control and blind-spot detection, digital instrument clusters ranging from 4 to 8.8 inches, a standalone Connected Infotainment Box and automated manual transmission control units.

The hardware, software and electronic systems on display utilise automotive development, cybersecurity and production standards adapted to motorcycle and powersports operational environments.

Comments (0)

ADD COMMENT

Link Copied!

Auto component manufacturer Eastman Auto and Power has appointed Rajesh Jindal as Chief Executive Officer.

He comes with over 34 years of corporate experience spanning sales, marketing and product management, following a 24-year tenure at Amara Raja Energy and Mobility, where he most recently served as Chief Marketing Officer for automotive batteries in India.

Jindal holds a bachelor's degree in mechanical engineering alongside a Master of Business Administration qualification. During his career, he has managed distribution networks, channel partner relations and go-to-market strategies within the energy storage and automotive component sectors.

Shekhar Singal, MD, Eastman Auto and Power, said, "With over 34 years of experience, Jindal has garnered experience in sales, marketing and product development and is well-positioned to accelerate Eastman’s growth journey. As he begins this new chapter at Eastman, we look forward to his leadership in deepening our commitment for delivering sustainable value for our customers, partners, employees and stakeholders - advancing the company's long-term growth aspirations and inspiring the organisation to achieve new milestones together."

Established in 2000, Eastman Auto and Power operates across three business verticals: last-mile electric mobility solutions, residential solar storage systems and energy storage solutions.

The company employs over 3,600 personnel across seven manufacturing plants in India, supported by a distribution network of more than 1,200 direct partners and over 400 original equipment manufacturer clients worldwide.

Comments (0)

ADD COMMENT

Link Copied!

Kuraray America, Inc. (KAI) recently took part in the SAE International Thermal Management Systems Symposium, held on 6–7 October 2026 in Dearborn, Michigan. The event gathered mobility-industry professionals to discuss technologies and emerging challenges in vehicle thermal management. Throughout the two-day symposium, the Kuraray GENESTAR team connected with attendees at Booth #19, sharing insights into high-performance engineering materials.

The team demonstrated how GENESTAR PA9T can meet demanding automotive application requirements. This heat-resistant polyamide engineering plastic was developed by Kuraray using unique monomers, combining low water absorption, high heat resistance, chemical resistance, dimensional precision and excellent moldability. It also offers electrical properties suitable for demanding electrical and electronic applications, including low water absorption, chemical resistance, moldability, insulation performance, thermal resistance and dimensional stability.

These characteristics make GENESTAR relevant for a broad range of electrical, electronic and automotive components. Kuraray lists automotive applications including connectors, relays, insulators and wire harnesses, while GENESTAR materials also serve in sliding, fuel and air-intake systems. The company reports use in automotive gears, bearings, piping and intercooler tanks, and the material is being considered for electric-vehicle applications as well.

The SAE symposium provided a forum for exchanging insights into evolving thermal management technologies. The 2026 programme covered battery and electronics cooling, climate control, alternative refrigerants and vehicle thermal engineering approaches. For Kuraray, participation enabled direct engagement with engineers and industry professionals about how high-performance materials can address increasingly complex automotive design requirements, with GENESTAR PA9T offering a material option where multiple performance demands must be met simultaneously.

Comments (0)

ADD COMMENT

Link Copied!